DISPERSIONS

Aquis The highly concentrated AQUIS colorants fulfil outstanding colorimetric demands and the solvent amount is limited to 10 %. AQUIS colorants are stable over a wide range of pH-values from 1 to 14 for coatings but also for a variety of other water-based applications.	Heucotint HEUCOTINT colorants are highly concentrated pigment preparations and exhibit outstanding incorporation properties. These products are adjusted volumetrically but allow also gravimetrically dosing due to the tight specification range.
Heucotint W HEUCOTINT W tinting systems for water based decorative applications are based on a well balanced mixture of highly and low concentrated colorants with outstanding light and weather fastness for cost-effective tinting in both point-of-sales and in-plant applications. The specially designed pigment to surfactant ratio exhibits a broad degree of compatibility with a wide variety of water-based decorative but also of silicone and silicate systems.	Heucotint UN HEUCOTINT UN Universal Colorants contain no glycols, solvents and APEO´s and meet modern environmental requirements regarding VOC. They are universally applicable colorants, which are available with both high & low-pigment concentrations, suitable for coloring of the majority of latex paints, emulsions and both water-based as well as solvent-based alkyd and silicone paint systems.
Heucofloor EP HEUCOFLOOR - EP - Pastes are created for the coloration of thickfilm systems based on solvent free epoxy-binders and mainly used for polymer floor coatings. The available pigment pastes are able to cover a broad color space, which make them suitable for industrial, gymnasium and decorative floor coatings.	Heucosperse HEUCOSPERSE I are low viscosity dispersions of organic pigments in a solution of styrene acrylic co-polymer. The pH is ad-justed to be in the range of 8.0 and 9.0. Pigmentation and resin levels have been carefully chosen to provide the best possible balance between stability, gloss, viscosity and compatibility.
Heucofloor PU HEUCOFLOOR – PU - pastes are created for the coloration of polyurethane systems. The paste carrier is a vegetable, hydroxyl-containing oil, which allow the crosslinking with the hardener to ensure the optimized mechanical floor coating properties. The maximum water content of the pigment paste is reduced to below 500 ppm.	Microsperse Plus MICROSPERSE PLUS preparations can be used to produce higher strength inks with low viscosity fulfilling the demands of higher screen anilox rolls with lower anilox volumes.
Ecopaque